Avaya CPSEE_TSP500 manual Defaultbilling keyword

Chapter 6 Trunk Spans and Dialing Rules

This keyword identifies which country the CPSEE_TSP500 is located in. It is automatically assigned by the TSP Configuratior and should not be changed.

DEFAULT_BILLING

This keyword assigns the default “billing digits.” They are used if the Call Manager fails to assign send them in the dial request. They are also used for non-campaign dials.

Example:

DEFAULT_BILLING 1234

Currently the Adjunct can only assign a maximum of four “billing digits.” The TSP500 can handle up to sixteen digits. If more than four digits are required, the additional digits can be placed into the Dialing Rule.

Example:

“1dP2c”

In the first example, “1” plus the phone number is dialed. Then a three-second pause occurs, followed by the DTMF digit 2, and then the assigned “billing digits.” If no “billing digits” are assigned to the campaign associated with the

dial	(or it was a non-campaign related dial), the default ”billing digits” are
used (if assigned). Remember the default “billing digits” are assigned using
the DEFAULT_BILLING keyword.
		Table 6-2: Dial String Control Characters
		Character	Description
		0 – 9, *, #	Any discrete digits or the asterisk
			or pound sign can be entered.
		d	Dial full phone number.
		D	Dial phone number. Strip area
			code.
		P	Pause 3 seconds
		p	Pause 1 second.
		T or t	Look for tone. Minimum duration
			is configured by the keyword
			TONE_TIME. The default is 100
			milliseconds.
		c	Send Billing Digits.
		i	Send International Country
			Code.
		n	Look for silence. Not used on
			TSP500.
Page 6-8		Version 4.0	CPSEE_TSP500 User Guide

This document is confidential and proprietary to SER Solutions and is not for external use.