Chapter 6 Trunk Spans and Dialing Rules
NUM_TRUNKS
This keyword specifies the total number of trunks and Stations configured on the CPSEE_TSP500. It is automatically assigned by the TSP Configurator.
OUTBOUND_DIGITAL_TRUNKS
This keyword assigns trunks that will be used for Outbound Digital Stations
Digital Stations are identified by the “D” character in the trunks.cnf file. By default all Digital Stations are assumed to be Inbound Digital Stations. This keyword must be used to change their default assignment to Outbound Digital Stations (sometimes called Remote Agents).
Example:
Assume T1 span 37 is to be used for Outbound Digital Stations:
OUTBOUND_DIGITAL_TRUNKS
PAMD_METHOD
See also: | This keyword indicates the type of Answering Machine Detection to be used. |
The default value of this keyword is zero. | |
Keyword |
|
VOICE_ANSM_MLENGTH. | PAMD_METHOD 0 |
| |
| Allow NMS to determine voice length by indicating an interim time. |
| PAMD_METHOD 1 |
| Determine voice length by timing voice begin to voice end. |
Caution!
These changes are for engi- neering and should not be acti- vated without their approval.
RECEIVE_PORT
This optional key word assigns the port that the TspRelay listens to. This key word is not needed if the default port of 514 is used.
Example:
RECEIVE_PORT 1199
REVERSE_STATIONS
This keyword indicates that the stations will be mapped to digital trunk spans in the reverse order (starting at the last span). This will allow customers to add stations without moving cables.
Page
This document is confidential and proprietary to SER Solutions and is not for external use.
