Avaya CPSEE_TSP500 manual Autolog, Callingnumber, Clockmaster, Clockpoll, Connthread, Country

Chapter 6 Trunk Spans and Dialing Rules

AUTO_LOG

Caution!

This equates to “bug 13f” With this flag turned on, cer- tain Admin_Terminal com- mands may appear not to work. However, it is possible that the output (that would normally go to the screen) may be going to the log files.

You can turn logging off via the “log” command. You may first want to type “bug 0” to prevent all the BUG mes- sages from flooding the screen.

If non-zero, it instructs the TSP to automatically log events. The value is the decimal equivalent of the hexadecimal value of the bug setting. A typical set- ting would be

AUTO_LOG 319

:

CALLING_NUMBER

Note:

Caller ID Text can only be assigned by CPS Enterprise Edition. There is no keyword that assigns a default.

This keyword defines a global originating number to be sent as Caller ID information over ISDN lines. The TSP allows originating information to be sent on a dial-by-dial basis, campaign basis, and a globally-assigned basis. The precedence is:

1.Number by Number

2.Campaign Assigned

3.Global Assignment

The number assigned by this keyword can be overwritten by the Call Man- ager or Gateway (and usually is).

CLOCK_MASTER

This keyword specifies the span to be designated the Primary Clock.

CLOCK_POLL

This keyword specifies (in seconds) the time to wait between processing clocking information. The default is five seconds, which should not be changed unless advised to do so by Engineering.

CONN_THREAD

This keyword is reserved for Engineering and should NEVER be modified unless instructed to do so by Engineering. The default value for this keyword is zero.

COUNTRY

CPSEE_TSP500 User Guide	Version 4.0	Page 6-7
This document is confidential and proprietary to SER Solutions and is not for external use.