Isdn Protocol Variants, CAS Protocols | Avaya CPSEE_TSP500 manual

Chapter 7 The TSP Configuration Tool

Trunk Protocol Selection and Storage Information

The available ISDN Protocol Variants are listed in Table 7-1.The NMS Variant Name is stored in the /opt/ser//cfg/trunks.cnf file. The NMS Down- loadable Module name is stored in the card’s configuration file /opt/nms/cg/ cfg/cg<slot>.cfg.

Table 7-1: ISDN Protocol Variants.

	Printed Name	NMS Variant Name	T1 or E1	NMS Downloadable
	Printed Name	NMS Variant Name	T1 or E1	Module (DLM)
				Module (DLM)

	AT&T 4ESS	AT4	T1	c65igen

	AT&T 5ESS	E10	T1	c65igen

	DMS	DMS	T1	c65igen

	NI2	NI2	T1	c65igen

	Australian Telecom 1	AUS	E1	c65igen

	EMCA-QSIG	QSIG	E1	c65igen

	EuroISDN	ETSI	E1	c65igen

	France Telecom VN6	VN6	E1	c65igen

The available CAS Protocols are listed in Table 7-2.The Protocol Name is stored in the /opt/ser//cfg/trunks.cnf file.

The TSP also supports AP2 CAS Protocol. This is a non-compelled R2 CAS protocol utilized in Australia. Although targeted for Australia, this protocol can be connected to the International Addit600 channel bank to provide an Analog Station solution in other countries.

Table 7-2: CAS Protocols

Printed Name	T1 or E1	Protocol Name

WINK INBOUND	T1	wi

WINK OUTBOUND	T1	wo

WINK INBOUND/OUTBOUND	T1	wio

IMMEDIATE INBOUND	T1	immi

IMMEDIATE OUTBOUND	T1	imm

Page 7-6	Version 4.0	CPSEE_TSP500 User Guide
	This document is confidential and proprietary to SER Solutions and is not for external use.

Image 140

Avaya CPSEE_TSP500 manual Trunk Protocol Selection and Storage Information, Isdn Protocol Variants, CAS Protocols

Contents

CPSEETSP500 Copyright TrademarksWarranties Compliance with Laws and Regulations Table of Contents Features and Enhancements Admin Terminal Commands Trunk Spans and Dialing Rules TSP Configuration Tool Intrusion Tone TSP Lights 10-111-1 12-5 Overview Introduction to This Guide Document Conventions Icon Description Introduction to the CPSEETSP500 CPSTSP500 System and Upgrades System Capacity Model Name Description T1Systems CPSTSP500 Telephony CardsTSP500 Telephony Cards TSP System Connections Monitor and Keyboard ConnectionsAgent Telephone Connections Inbound Digital Station TSP User Procedures Shutting Down The CPSEETSP500 Rebooting the CPSEETSP500 To Exit the AdminTerminal From the TSP500 Admin terminal Type quitStarting and Stopping The CPSEETSP500 Starting The TSP From The menu Disable Auto Booting Auto Booting the TSPActivating Auto Booting Setting the Time/Date on the TSP Hwclock --set --date=2/20/03 182400 --utc Starting/Configuring TSP500 Logging Into TSP Press Enter. The Cpsee TSP copyright and Main Menu appears Activating the CPSEETSP500 Main MenuQuit Admin Terminal TSP Configuration Menu Accessing the Dialing RulesRed Hat Linux VI Commands Command Description Modifying the Isdn Configuration Dialing Rules File Item Option Description Editing the Isdn ConfigurationIsdn Options Subscreens of the Isdn Configurations Default = 2 T1 Default = 3 E1 Isdn Configuration Transfer Mode 11. Isdn Configuration Network Signaling Behavior 15. Isdn Configuration Origination Number Type View Isdn Configurations Consult carrier for calling name and proper configuration Configuring the Syslog Reset Isdn ConfigurationTspLogger configuration elements Element Description Syslog Viewers System Tools are for monitoring T1/E1 signalingSelect System Tools BoardInfo CAS SignalsAgTrace3073 Isdn Trace View Trace File Trunk Span Protocols View the Trunks FileTrunk Protocol Trunk Type Trunk Board NumberTrunk Variant Variant field indicates the network protocol variant Trunk Wait for Digit Write Configuration to ArchiveTrunk Wait for First Digit Page Features and Enhancements Introduction Restarting Protocols Examples Graceful Campaign Close Integrated Recording Feature See Also Integrated Recording on Example Agentless Campaign FeatureTransferring a Call off of the TSP Text-To-Speech TTS Messages Feature Caller ID Name Feature Example Features and Enhancements Collect Dtmf Digits Feature Personnel Ring Back Feature Configuration Features and Enhancements Trunk Features and Enhancements New Trunk Utilization files FeatureNew TUT FIles Example grep TrunkBound *.txt Trunk Bound Alerts Sent to the SysLogger Billing Codes Feature Support for Isdn protocol DMS250 Feature User Data Features and EnhancementsSending User Data over Isdn Feature New Country Feature Support for India has been added to the TSP Monitoring Features and Enhancements Silent Coaching FeatureType load all at the AdminTerminal Rules Restricted Monitors Enhancement Client Monitoring for Outbound Remote Stations-FeatureClient Monitoring for Conferences -Enhancement Bad Example Good Example Load misc or load all Decibel Level Adjustment Feature Dialing Features and Enhancements Unrestricted Manual Dial FeatureRedials of Incompletes Feature Digital Station Dials Enhancement Example Detecting Beeps on Answering Machines Feature Answering Machine EnhancementsAnswering Machine Detection Parameters Enhance- ment New Keywords values Keyword Default Admin Description Terminal Ansmsilence New Commands New Dumb Terminal Commands FeatureLoad misc RULE0-4Page Admin Terminal Commands Admin Terminal Commands List of Commands BUGFollowing is description of the above items Bug Traces Displays the Isdn parameters defined for the specified span CallCapture Capturetnum CapturetrkaudCause Cfig Conns CMDConf Dial DisableCrate Enable Fhang Help Inbound inb InstallHtrunk ht Install Flags Ipstats License lic LinkpLloop Load Music This command will turn Music-On-Holdon or offLOG Usr/home/cpstsp/sps01/pmt Installing Music-On-HoldExamples of the Music Command Following is a list of options that can be set Testing Music On HoldOptions opt Option Flags #123# Key = Use #123# as the key = Use \*123\* as the key Park PlayPoisson Poisson Distributions Symbol Meaning Poisson syntax BeepTimer PrepQcheck qc BeepQueue CampBusy CampCloseCampIdle CardExcess DspIdle EventQueExcess InbBusy Tdisabled SpyAvailSpyBad SpyInuse Qmsg qm 11 Qport Command Exit the AdminTerminalQport qp Quit Recording Required = Move File 1 = ConcatenateRecord 1 Minute Snippets Use Closing Threads Recstate Record rec RloopShook RecControlCnt Show sho Show boardShow camp 12 show board Show cause Example show camp -aDisplays Campaign related information plus algorithm stats 14 show camp -a Show cmon Show dspShow dstation 16 show dsp Show errors Displays various error counts, and some statistics18 show errors 17 show dstation Show group Show monidsShow ports Displays the Trunk Numbers assigned to each Trunk Group Show stat Show switch 21 show switchShow trunks 20 show stat Show util 22 show trunksOptions can be used to rotate through the previous 24 hours 23 show util Silencedb SilencetimeSimcamp Simin Slots sl Slots Screen 24 Slots Command Span Sreset 25 Span CommandSpstuff sp Status st 26 Status Command Syslog Tline Treset Resets call control information for the specified trunkTonetime Tplay Displays a variety of configuration information 28 ConfigurationVersion 27 Trunk Trace Stuff Voiceleakage Voicelength Voicenoise VoiceratioVoicetime Vparms Trunk Spans and Dialing Rules File Description Directory Common Configuration directoryCommon Directory Trunks.cnf Tsp.cnf Dialing Rules Building Dialing Rules Tutorial Key Words of Dialing Rules Wait for a period of silence before playing the message AnsmusetoneAreacodedigits Autolog CallingnumberClockmaster Clockpoll Defaultbilling Defaultbilling keywordDial String Control Characters Character Description Devicesperthread Examples Disabledtrunks DialeddigitsaniDisplayietag Downloadboards Intrusiontone IvrtrunksLOCALAREACODE00 LOCALAREACODE01 through LOCALAREACODE31 Localwatt LocnameLongwatt Maxlogsize Monitoronly MonitorassignNaizero Numstations Numtrunks OutbounddigitaltrunksPamdmethod Receiveport Rnaextendtime RULE0 through RULE4 Spylist ThirdpartyTonefreq Dialing Rules Special Characters Tonerange TonetimeTossedmessages Trunkchecktime Voiceansmlength TrunkidletimeUsesilentcoaching Voiceansmmlength VoiceleakagetimeVoicenoiselevel Voicesilencelevel Waitforsupervision TSP Configuration Tool Configuration Tool Overview Using the Configuration Tool RequirementsAudience Text Conventions Configuration Files NMS Directory Structure TSP Configuration Directory Structure Required to modify the configuration of a systemTrunks.cnf Tsp.cnf Trunk Protocol Selection and Storage Information Isdn Protocol VariantsCAS Protocols Printed Name T1 or E1 Protocol Name Line Codes Framing TypesT1 and E1 Line Codes Framing Type Card Type Selection TSP500 Card Types Configuring the System Accessing Configuration ToolConfigurator Menu This is the main menu for the configuration tool Initialize Configuration Boards Select the country where this system will be installed Trunk Information If a 6565 this is what you will see Station Information Edit/View Configuration Encore and Conferencing Information Card Information TSP Configuration Tool Displaying the Configuration Saving a Configuration Displaying Card Layout Initialize Configuration Option Download Configuration Restore Configuration TSP Configuration Tool Sample T1 Configuration Initialization Trunk Information Station Information Encore and Conferencing Information TSP Configuration Tool TSP Configuration Tool TSP Configuration Tool Sample T1 Configuration Modification TSP Configuration Tool TSP Configuration Tool TSP Configuration Tool TSP Configuration Tool TSP Configuration Tool Sample E1 Configuration Initialization Trunk Information Station Information Network Trunks TSP Configuration Tool TSP Configuration Tool TSP Configuration Tool Page TSPLogger Centralized logging feature of the CPSEETSP500 OverviewTspLogger Rlogger Description Configuration SysloghostSyslogport Sysloghost Syslogname Syslogname Omaha TSP Syslog Viewers TSP Control TSPLogger Events Call Manger or Gateway has connected to the TSP TSP Name T1/E1 span xx is Down Linux was rebooted or powered up Linux is shutting down. possible reboot or shutdown issued TspRelay Supported Key WordsStarting the TspRelay Following three key words are supported For a Call Manager running Linux, it would be ErrorsRlogger Page Intrusion Tone Intrusion Tone Implementing Intrusion Tone Intrusion Using Intrusion Tone TSP Lights This section includes the following TSP Light Display TSP Light Display Color of trunk and station lightsHealth of associated spans Color Meaning Accessing Text-To-Speech Accessing Text-To-Speech Messages Otherwise proceed to the next step Mount the external drive Mounting the External DriveIf /home/tts is listed, do the following Page Integrated Recording See Also Integrated Recording Feature on Files modified during installation Components of Integrated RecordingRAM Disk Recording Server Disk Monitor Daemon Recording Resource Manager Appendix 12 Integrated Recording Integrated Recording Operation Appendix 12 Integrated Recording Page Appendix a Troubleshooting Common Questions Common Questions on Caller ID CPSEETSP500 Hard Drive Diagnostic Login to rootInstructions Type ide-smart /dev/hda CPSEETSP500 now logs when a socket connection closes Example Enhanced Logging for Socket ConnectionsPage Index Enable Qcheck TONETIME1