Chapter 5 Admin Terminal Commands
RecBits = 0e
0Recording Required
10 = Move File. 1 = Concatenate File.
1Record 1 Minute Snipits
1Use Closing Threads
0Use VCE instead of ADI
0
0
0
0
0
0
0
0
Recording Required
If this bit is set, then the TSP will stop dialing if any of the recording compo- nents are not operational.
0 = Move File 1 = Concatenate
Defines whether snippet files should be moved or concatenated.
Record 1 Minute Snippets
If this flag is turned off, then TSP will record a single audio file rather than 1- minute snippets.
Use Closing Threads
Specifies whether a thread should be used to close audio files. This also affects TTS and should normally be set to one.
Use VCE instead of ADI
Specifies to use the alternate method for recording. Under VCE there are no buffer full events generated. However, there may be gaps between the snip- pet recordings. If snippets are not used, then VCE is the preferred method. If snippets are used, ADI is the preferred method.
Page
This document is confidential and proprietary to SER Solutions and is not for external use.
