Chapter 6: Configuration
Figure 6-66. The QoS Ingress Port Policers Configuration screen.
Parameter Description
Port: The logical port for the settings contained in the same row. Click on the port number to configure the schedulers.
Mode: Check the box next to the port that you need to enable the QoS Ingress Port Policers function.
Rate: Set the Rate limit value for this port. The default is 500.
Unit: Scroll to select the rate unit from kbps, Mbps, fps and kfps. The default is kbps.
Flow Control: Check this box to enable flow control on a port. Leave it unchecked to disable the flow control. Buttons:
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
LGB5028A User‘s Manual | Page 137 | |
|
|
