Chapter 5: System Configuration
Figure 5-11. The System Log Information screen.
Parameter Description
Auto-refresh: Check the box next to auto-refresh, and the device will refresh the log automatically. The following level types are supported:
Information: Information level of the system log.
Warning: Warning level of the system log.
Error: Error level of the system log.
All: All levels.
ID: ID (>= 1) of the system log entry.
Level: Level of the system log entry.
Time: The time of the system log entry. It will display the log record by device time.
Message: The message of the system log entry. It will display the log detail message.
Upper right icon (Refresh, Clear,…): Click “Refresh”to refresh the system log or click clear to clear manually, or choose “<<” and “>>” to go to the next/previous page or entry.
5.5.3 Detailed Log
This section describes the switch’s detailed log information.
Web Interface
To display the detailed log information in the Web interface:
1.Click “Syslog,” “Detailed Log.”
2.Display the log information.
Page 30 | LGB5028A User‘s Manual | |
|
|
