![](/images/new-backgrounds/1172628/172628257x1.webp)
Chapter 6: Configuration
6.12.1 Configuration
This page allows you to configure the basic GARP Configuration settings for all switch ports.
The settings relate to the currently selected unit, as reflected by the page header.
Web Interface
To configure GARP Port Configuration in the Web interface:
1.Click “GARP configure.”
2.Specify GARP configuration parameters.
3.Click “Save.”
Figure 6-61. The GARP Port Configuration screen.
Parameter Description
Port: The Port column shows the list of ports for which you can configure GARP settings. There are four types of configuration settings that can be configured on a per port basis.
•Timer Values
•Application
•Attribute Type
•GARP Applicant
Timer Values:
Set the GARP join timer, leave timer, and leave all timers, in units of microseconds.
LGB5028A User‘s Manual | Page 129 | |
|
|