Chapter 5: System Configuration
Figure 5-5. The NTP Configuration screen.
Parameter Description
Server 1 to 5: Provide the switch’s NTP IPv4 or IPv6 address. IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon separating each field (:). For example, “fe80::215:c5ff:fe03:4dc7'’ The symbol “::” is a special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros, but it can only appear once. It can also represent a legally valid IPv4 address. For example, “::192.1.2.34”
Buttons
These buttons are displayed on the NTP page:
Save—Click to save changes.
Reset—Click to undo any changes made locally and revert to previously saved values.
5.3 Account
Only the administrator can create, modify, or delete the username and password. The administrator can modify other guest identities’ passwords without confirming the password, but he must modify the
NOTE: You must confirm administrator/guest identity in the field of Authorization in advance before configuring the username and password. Only one administrator is allowed to exist and can’t be deleted. In addition, up to 4 guest accounts can be created.
5.3.1 Users
This page provides an overview of the current users. Currently the only way to log in as another user on the Web server is to close and reopen the browser.
Web Interface
To configure Account in the Web interface:
1.Click “System,” “Account,” “Users.”
2.Click “Add new user.”
3.Specify the “User Name” parameter.
4.Click “Save.”
LGB5028A User‘s Manual | Page 23 | |
|
|
