![](/images/new-backgrounds/1172628/172628393x1.webp)
Chapter 7: Security
Upper right icon (Refresh, Clear): Click on the “Refresh” button to refresh the RADIUS Statistics information manually. Click on the “Clear” button to clear all entries.
7.7 Port Security
7.7.1 Limit Control
This section shows you how to configure the port security settings of the switch. Use the port security feature to restrict input to an interface by limiting and identifying MAC addresses.
Web Interface
To configure a system configuration of limit control in the Web interface:
1.Select ““Enabled” in the system configuration mode.
2.Check the box next to “Aging Enabled.”
3.Set the aging period (default is 3600 seconds).
To configure a port configuration of limit control in the Web interface:
1.Select “Enabled” in the port configuration mode.
2.Specify the maximum number of MAC addresses in the limit of port configuration.
3.Set action (trap, shutdown, trap and shutdown)
4.Click “Save.”
LGB5028A User‘s Manual | Page 197 | |
|
|