Chapter 5: System Configuration
Figure 5-14. The SNMPv1/v2 Communities Security Configuration screen.
Parameter Description
Delete: Check to delete the entry. It will be deleted during the next save.
Community: Indicate the community access string to permit access to SNMPv3 agent. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The community string will be treated as security name and map a SNMPv1 or SNMPv2c community string.
User Name: The UserName access string permits access to SNMPv3 agent. The length of the “UserName” string is restricted to 1–32.
Source IP: Indicates the SNMP access source address. A particular range of source addresses can be used to restrict source subnet when combined with source mask.
Source Mask: Indicates the SNMP access source address mask.
5.6.3 Users
The function is used to configure SNMPv3 user. The Entry index key is UserName. To create a new UserName account, check the “Add new user” button, enter the user information, then check “Save.”
Max Group Number: 10.
Web Interface
To configure SNMP Users in the Web interface:
1.Click “SNMP,” “Users.”
2.Specify the Privilege parameter.
3.Click “Save.”
LGB5028A User‘s Manual | Page 33 | |
|
|
