Chapter 6: Configuration
Parameter Description
Group Name: The field describes the Trap Event.
Severity Level: Scroll to select the event type from “Emerg,” “Alert,” “Crit,” “Error,” “Warning,” “Notice,” “Info,” and “Debug.”
Buttons:
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
6.20 SMTP Configuration
The function sets an alarm trap. Set the SMTP server to send you an alarm email.
Web Interface
To configure the SMTP configuration in the Web interface:
1.Click “Configuration,” “SMTP Configuration.”
2.Scroll to select the severity level.
3.Specify the parameters in each blank field.
4.Click “Save” to save the setting
5.To cancel the setting, click the “Reset” button. It will revert to previously saved values.
Figure 6-88. The SMTP Configuration screen.
Parameter Description
These parameters are displayed on the SMTP Configuration page:
Mail Server: Specify the IP address of the server transferring your e-mail.
Username: Specify the username on the mail server.
Password: Specify the password on the mail server.
Sender: Set the mail sender name.
Return Path: Set the mail return path as the sender mail address.
LGB5028A User‘s Manual
Page 169 |
