Chapter 7: Security
Figure 7-24. The Access Management Configuration screen.
Parameter Description
Mode: Indicates the access management mode operation. Possible modes are:
Enabled: Enable access management mode operation.
Disabled: Disable access management mode operation.
Delete: Check to delete the entry. It will be deleted during the next save.
Start IP Address: Indicates the start IP address for the access management entry.
End IP Address: Indicates the end IP address for the access management entry.
HTTP/HTTPS: Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address matched the IP address range provided in the entry.
SNMP: Indicates that the host can access the switch from the SNMP interface if the host address matches the IP address range provided in the entry.
TELNET/SSH: Indicates that the host can access the switch from the TELNET/SSH interface if the host IP address matches the IP address range provided in the entry.
Buttons:
Add: Click on this button to add an access management configuration.
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
LGB5028A User‘s Manual | Page 203 | |
|
|
