Chapter 6: Configuration
MAC Table Learning
1.Click “Configuration.”
2.Specify the Port Members (“Auto,” “Disable,”“Secure”).
3.Click “Save.”
Static MAC Table Configuration
1.Click “Configuration” and “Add new Static entry.”
2.Specify the VLAN IP and MAC address, Port Members.
3.Click “Save.”
Figure 6-48. The MAC Address Table Configuration.
Parameter Description
Aging Configuration
By default, dynamic entries are removed from the MAC table after 300 seconds. This removal is also called aging.
Configure aging time by entering a value here in seconds; for example, “x” seconds, where “x” is 10 to 1,000,000 seconds.
Disable the automatic aging of dynamic entries by checking “Disable Automatic Aging.”
MAC Table Learning
If the learning mode for a given port is grayed out, another module is in control of the mode, so that it cannot be changed by the user. An example of such a module is the MAC-based authentication under 802.1X. Each port can learn based upon the following settings:
Page 110 | LGB5028A User‘s Manual | |
|
|
