Chapter 6: Configuration
Figure 6-7. The ACL Ports Configuration screen.
Parameter Description
Port: The logical port for the settings contained in the same row.
Policy ID: Select the policy to apply to this port. The allowed values are 1 through 8. The default value is 1.
Action: Select whether forwarding is permitted (“Permit”) or denied (“Deny”). The default value is “Permit.”
Rate Limiter ID: Select which rate limiter to apply on this port. The allowed values are “Disabled” or the values 1 through 16. The default value is “Disabled.”
Port Redirect: Enables you to select which port frames are redirected. The alllowed values are “Disabled” on a specific port number. The default value is “Disabled.”
LGB5028A User‘s Manual | Page 49 | |
|
|
