Chapter 6: Configuration
NOTE: For a given port, a frame is only transmitted once. It is not possible to mirror Tx frames on the mirror port. Because of this, the mode for the selected mirror port is limited to disabled or Rx only.
Buttons:
Save: Click to save changes.
Reset: Click to undo any changes made locally and revert to previously saved values.
6.19 Trap Event Severity
The function is used to set an alarm trap and get the event log. The Trap Events Configuration function enables the switch to send out the trap information when
Web Interface
To configure the Trap Event Severity Configuration in the Web interface:
1.Click “Configuration,” “Trap Event Severity Configuration.”
2.Scroll to select the group name and severity Level.
3.Click “Save” to save the setting.
4.To cancel the setting, click the “Reset” button. It will revert to previously saved values.
Figure 6-87. The Trap Event Severity Configuration screen.
Page 168 | LGB5028A User‘s Manual | |
|
|
