Chapter 6: Configuration
Figure 6-41. The LLDP Configuration screen.
Parameter Description
LLDP Parameters
Tx Interval: The switch periodically transmits LLDP frames to its neighbors to update the network discovery information. The interval between each LLDP frame is determined by the Tx Interval value. Valid values are restricted to
Tx Hold: Each LLDP frame contains information about how long the information in the LLDP frame is considered valid. The LLDP information valid period is set to Tx Hold multiplied by Tx Interval seconds. Valid values are restricted to
Tx Delay: If some configuration is changed (e.g. the IP address) a new LLDP frame is transmitted, but the time between the LLDP frames will always be at least the value of Tx Delay seconds. Tx Delay cannot be larger than 1⁄4 of the Tx Interval value. Valid values are restricted to
LGB5028A User‘s Manual | Page 95 | |
|
|