5 Replacing cooling system components
FIGURE 46 Air filter removal and replacement for BigIron RX-8
1
| 2 |
|
|
| 3 |
| 4 |
1 | Direction of airflow in chassis | 3 | Filter retainer |
2 | Filter | 4 | Fan trap |
3.Pull the air filter out of the chassis and discard.
4.Insert the replacement air filter by sliding it along the metal guides.
The filter is marked with an arrow. The arrow indicates how the filter should be installed in regards to the direction of airflow in the chassis. Since air is pulled through the chassis, the arrow must point right towards the fan tray.
Push the filter retainer into the chassis and tighten the two screws.
120 | Brocade BigIron RX Series Hardware Installation Guide |
|
