Brocade Communications Systems S3-1002483-03 manual Gigabit Ethernet interface module RJ-45

Hardware features 1

NOTE

The device will be FE or GE capable, but will only display that is GE to indicate the maximum speed capability of the module.

NOTE

The actual speed will be displayed once the link is seen and the port auto-senses the speed of the SFP.

You can issue the show media command to display the type of optic installed and determine the speed the port will run at when the link is received.

Figure 7 shows the 24-port 1 Gigabit Ethernet mini-GBIC (or SFP) module’s front panel.

FIGURE 7 24-port 1 Gigabit Ethernet SFP module front panel

1

1 Port status LEDs

The front panel includes the following control features:

•LEDs

•24 1-Gigabit Ethernet mini-GBIC (SFP) ports

TABLE 5	Gigabit Ethernet module LEDs
Position		State	Meaning
Below each Ethernet		On or blinking	The port is transmitting and receiving packets.
port
		Off for an extended period	The port is not transmitting or receiving packets.
(left-side LED

supports port in top row while right-side LED supports port in bottom row)

Gigabit Ethernet interface module (RJ-45)

Figure 8 shows the 24-port 1 Gigabit Ethernet module’s front panel.

FIGURE 8 24-port 1 Gigabit Ethernet module front panel

The front panel includes the following control features:

Brocade BigIron RX Series Hardware Installation Guide	13
53-1002483-03