Brocade Communications Systems S3-1002483-03 Displaying version information, Interface Modules

6 Displaying flash memory and version information

TABLE 23	Code flash and boot flash information (Continued)
This field...		Displays...
Boot-Monitor Image		Indicates the boot image installed in the management module’s boot flash.
		The image name format is described in “Software image naming
		conventions” on page 123. The output displays the following information
		about the image:
		• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
		is used by Brocade for record keeping. The “xx” indicates the hardware
		type, while the “y” indicates the image type.
		• Size – The size, in bytes, of the image.
		• Check sum – A unique ID for the image. If the contents of the image
		change, the check sum changes also.
		• Compilation date and time – The date and time that Brocade compiled
		the image.
Interface Modules
Line Card Slot <number>		The interface module for which flash information is displayed.
		The <number> parameter indicates the number of the chassis slot, 1 – 16,
		in which the interface module is installed.
Code Flash		The model number and size of the interface module’s code flash.
IronWare Image (Primary or		Indicates the IronWare image installed in the primary or secondary location
Secondary)		in the interface module’s code flash. The image name format is described
		in “Software image naming conventions” on page 123. The output displays
		the following information about the image:
		• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
		is used by Brocade for record keeping. The “xx” indicates the hardware
		type, while the “y” indicates the image type.
		• Size – The size, in bytes, of the image.
		• Check sum – A unique ID for the image. If the contents of the image
		change, the check sum changes also.
		• Compilation date and time – The date and time that Brocade compiled
		the image.
Boot Flash		The model number and size of the interface module’s boot flash.
Boot-Monitor Image		Indicates the boot image installed in the interface module’s boot flash. The
		image name format is described in “Software image naming conventions”
		on page 123. The output displays the following information about the

image:

• Version – “2.3.0Txxy” indicates the image version number. The “Txxy” is used by Brocade for record keeping. The “xx” indicates the hardware type, while the “y” indicates the image type.

• Size – The size, in bytes, of the image.

• Check sum – A unique ID for the image. If the contents of the image change, the check sum changes also.

• Compilation date and time – The date and time that Brocade compiled the image.

Displaying version information

You can display version information for a BigIron RX Series switch using the e command as shown in the following:

BigIron RX# show version

HW: BigIron RX Router

128	Brocade BigIron RX Series Hardware Installation Guide
	53-1002483-03