Brocade Communications Systems S3-1002483-03 manual Ule

4	Managing the cooling system
	Fan Speed	Med-Hi:	51 -		60
	Fan Speed	Hi: 56 -		85
	state = 0	(FAN_STATE_LOW)
	max_ts_shut_off_count = 3
	shut_off_count = 0			0 0	0 0 0 0 0 0 0 0 0 0 0 0 0
	=== Thermal Sensor			Control Block (THERMAL_SENSOR_TEST_RULE_STANDBY_MP) ===
	Fan Speed	Low: -1	- 60
	Fan Speed	Med: 57	- 70		80
	Fan Speed	Med-Hi:	67 -
	Fan Speed	Hi: 77 -		85
	state = 0	(FAN_STATE_LOW)
	max_ts_shut_off_count = 3
	shut_off_count = 0			0 0	0 0 0 0 0 0 0 0 0 0 0 0 0
	=== Thermal Sensor			Control Block (THERMAL_SENSOR_TEST_RULE_MP_CPU) ===
	Fan Speed	Low: -1	- 60
	Fan Speed	Med: 57	- 70		80
	Fan Speed	Med-Hi:	67 -
	Fan Speed	Hi: 77 -		85
	state = 0	(FAN_STATE_LOW)
	max_ts_shut_off_count = 3
	shut_off_count = 0			0 0	0 0 0 0 0 0 0 0 0 0 0 0 0
	=== Thermal Sensor			Control Block (THERMAL_SENSOR_TEST_RULE_STANDBY_MP_CPU) ===
	Fan Speed	Low: -1	- 60
	Fan Speed	Med: 57	- 70		80
	Fan Speed	Med-Hi:	67 -
	Fan Speed	Hi: 77 -		85
	state = 0	(FAN_STATE_LOW)
	max_ts_shut_off_count = 3
	shut_off_count = 0			0 0	0 0 0 0 0 0 0 0 0 0 0 0 0

Syntax: show fan-threshold

The display shows the following information:

TABLE 20	Temperature threshold information for modules and fan speeds
This field...		Displays...
Thermal Sensor Control Block		The temperature threshold information for the various modules. The
(THERMAL_SENSOR_TEST_RULE_<mod		<module> parameter indicates the following:
ule>)		• MP – The active management module
		• STANDBY_MP – The standby management module
		• SNM – The switch fabric module
		• LP – An interface module
Fan Speed Low or Med or Med-Hi or Hi		The current setting of the low and high temperature thresholds for the
		low, medium, medium-high, and high fan speeds.
		NOTE: As indicated in Table 19 on page 84, the low fan speed for each
		module does not have a default low temperature threshold
		value, nor can you configure this value. The “-1” value that
		appears in the Fan Speed Low field for each module is a
		Brocade internal value only.
State = 0 (FAN_STATE_LOW)		For Brocade internal use only.
max_ts_shut_off_count
shut_off_count = 0 0 0 0 0 0 0 0		For Brocade internal use only.

86	Brocade BigIron RX Series Hardware Installation Guide
	53-1002483-03