| Chapter | |
Managing the BigIron RX Series Chassis and Modules | 4 |
|
|
|
|
In this chapter
•Managing the BigIron RX Series chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
•Managing the cooling system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
•Managing the interface modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
•Enabling and disabling management module CPU usage calculations . . . 96
•Displaying management module CPU usage. . . . . . . . . . . . . . . . . . . . . . . . . 97
•Removing MAC address entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Managing the BigIron RX Series chassis
DANGER
The procedures in this manual are for qualified service personnel.
This chapter contains information about refining the configuration of, monitoring, and managing the BigIron RX Series hardware components
You can perform the following management tasks for the BigIron RX Series chassis:
•Display chassis status and temperatures of all hardware components
•Display the Syslog configuration and static and dynamic buffers
Displaying chassis status and temperature readings
You can display the following information related to the BigIron RX Series chassis:
•Slot
•Status of the fans
•Temperature readings of the management, switch fabric, interface, and fan control modules and the interval at which the system reads the temperature of these modules
•The MAC address of the BigIron RX Series chassis
To display this information, enter the following command at any level of the CLI:
BigIron RX# show chassis
*** BigIron
Brocade BigIron RX Series Hardware Installation Guide | 79 |
|