6

Upgrading the BigIron RX Series software

 

Boot

: Version 2.7.3T155 Copyright (c) 1996-2010 Brocade Communications

 

Systems,

Inc.

 

Compiled

on Aug 27 2010 at 01:23:18 labeled as rlb02703

 

(307473

bytes) from boot flash

 

Monitor

: Version 2.7.3T155 Copyright (c) 1996-2010 Brocade Communications

 

Systems,

Inc.

 

Compiled

on Aug 27 2010 at 01:23:18 labeled as rlb02703

 

(307473

bytes) from code flash

 

IronWare

: Version 2.7.3T157 Copyright (c) 1996-2010 Brocade Communications

 

Systems,

Inc.

 

Compiled

on Aug 27 2010 at 01:51:10 labeled as rlp02703

 

(2334914 bytes) from Primary

 

FAP 1 version: 3

 

FAP 2 version: 3

 

FAP 3 version: 0

 

FAP 4 version: 0

 

660 MHz Power PC processor 440GP (version 8020/0020) 330 MHz bus

 

512 KB Boot Flash (AM29LV040B), 16 MB Code Flash (MT28F640J3)

 

512 MB DRAM, 8 KB SRAM, 0 Bytes BRAM

 

LP Slot 1 uptime is 11 minutes 57 seconds

 

.

 

 

.

 

 

.

 

 

==========================================================================

 

All show

version done

Syntax: show version

Upgrading the BigIron RX Series software

This section describes the upgrade procedures required to operate a BigIron RX. Read this section before you upgrade the BigIron RX software. It contains the following information:

“Changes to software images starting with version 02.5.00”

“Unified software image upgrade to upgrade release 02.6.00 and later”

“Upgrading software releases prior to release 02.2.01”

“Hitless Layer 2 OS upgrade”

“Basic tasks in the software upgrade process”

“Upgrading the management module monitor and boot images”

“Upgrading the IronWare image on a management module”

“Rebooting the management module”

“Upgrading the MBRIDGE FPGA on the management module”

Changes to software images starting with version 02.5.00

Depending on the versions you are upgrading from or to, the procedures can be different. Follow the procedures described in the following sections:

“For interface modules running versions earlier than 02.3.00”

“Separation of boot and monitor images”

“Upgrading to version 02.5.00 (or later) from a pre- 02.5.00 version”

130

Brocade BigIron RX Series Hardware Installation Guide

 

53-1002483-03

Page 142
Image 142
Brocade Communications Systems S3-1002483-03 manual Upgrading the BigIron RX Series software, Syntax show version