Verifying proper operation | 2 |
TABLE 13 Desired and abnormal LED states after system power on (Continued)
LED | Desired state | Meaning | Abnormal | Meaning or action |
|
|
| state |
|
|
|
|
|
|
Link | On | A link is established | Off | At this stage of the installation, |
|
| with the remote port. |
| you have not yet cabled the |
|
|
|
| interface module ports, so this |
|
|
|
| LED will be off. |
|
|
|
| After cabling this port, if this LED |
|
|
|
| is off, a link is not established with |
|
|
|
| the remote port. For more |
|
|
|
| information, refer to Table 15 on |
|
|
|
| page 75. |
|
|
|
|
|
Active | On or blinking | The port is | Off for an | At this stage of the installation, |
|
| transmitting and | extended | you have not yet cabled the |
|
| receiving user packets. | period. | interface module ports, so this |
|
|
|
| LED will be off. |
|
|
|
| After cabling this port, if this LED |
|
|
|
| is off, the port is not transmitting |
|
|
|
| or receiving user packets. For |
|
|
|
| information about action you can |
|
|
|
| take to troubleshoot the problem, |
|
|
|
| refer to Table 15 on page 75. |
Switch fabric module
Pwr | On | The module is | Off | The module is not receiving power. |
|
| receiving power. |
| You can do the following: |
|
|
|
| • If using AC power supplies, |
|
|
|
| see the entry for the AC |
|
|
|
| power supply LED in this |
|
|
|
| table for more information. |
|
|
|
|
|
Active | On | The switch fabric | Off for an | The switch fabric module is not |
|
| module is active and | extended | active and user packets are not |
|
| ready to switch user | period. | being switched from one interface |
|
| packets. |
| module to another. |
|
|
|
| You must replace the switch fabric |
|
|
|
| module. For information about |
|
|
|
| performing this task, refer to |
|
|
|
| “Replacing a switch fabric |
|
|
|
| module” on page 109. |
|
|
|
|
|
Power supplies AC |
|
|
|
|
|
|
|
|
|
AC OK | Green (steady) | The power supply is | Off | The power supply is not receiving |
|
| receiving AC power |
| power from an AC power source |
|
| from an AC power |
| You can do the following: |
|
| source. |
| • Make sure that the power |
|
|
|
| supply cord is connected |
|
|
|
| securely to the wall outlet |
|
|
|
| and the power supply. |
|
|
|
| • Make sure that the wall |
|
|
|
| outlet is rated for 115/120V |
|
|
|
| and 20A. If it is not, obtain a |
|
|
|
| cable that is compatibly rated |
|
|
|
| for the outlet. |
|
|
|
| • Make sure that the wall |
|
|
|
| outlet has power. |
Brocade BigIron RX Series Hardware Installation Guide | 59 |
|
