Brocade Communications Systems S3-1002483-03 manual This field Displays

		Displaying flash memory and version information	6
TABLE 23	Code flash and boot flash information (Continued)
This field...		Displays...
LP Kernel Image (Monitor for LP		Indicates the interface module Boot-Monitor image stored in the
Image Type 0)		management module’s code flash. The management module stores these
		images only; it does not run the images. The image name format is
		described in “Software image naming conventions” on page 123. The
		output displays the following information about the image:
		• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
		is used by Brocade for record keeping. The “xx” indicates the hardware
		type, while the “y” indicates the image type.
		• Size – The size, in bytes, of the image.
		• Check sum – A unique ID for the image. If the contents of the image
		change, the check sum changes also.
		• Compilation date and time – The date and time that Brocade compiled
		the image.
LP IronWare Image (Primary or		Indicates the interface modules’ primary or secondary IronWare image
Secondary for Module Type 0)		stored in the management module’s code flash if you copied the primary or
		secondary IronWare image to all interface modules using the copy
		command with the all keyword. The management module stores these
		images only; it does not run the images. The image name format is
		described in “Software image naming conventions” on page 123. The
		output displays the following information about the image:
		• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
		is used by Brocade for record keeping. The “xx” indicates the hardware
		type, while the “y” indicates the image type.
		• Size – The size, in bytes, of the image.
		• Check sum – A unique ID for the image. If the contents of the image
		change, the check sum changes also.
		• Compilation date and time – The date and time that Brocade compiled
		the image.
Boot-Monitor Image		Indicates the monitor image installed in the management module’s code
		flash. The image name format is described in “Software image naming
		conventions” on page 123. The output displays the following information
		about the image:
		• Version – “2.3.0Txxy” indicates the image version number. The “Txxy”
		is used by Brocade for record keeping. The “xx” indicates the hardware
		type, while the “y” indicates the image type.
		• Size – The size, in bytes, of the image.
		• Check sum – A unique ID for the image. If the contents of the image
		change, the check sum changes also.
		• Compilation date and time – The date and time that Brocade compiled
		the image.
Startup Configuration		The output displays the following information about the startup
		configuration, which is saved in the management module’s code flash:
		• Size – Size, in bytes, of the startup configuration.
		• Check sum – A unique ID for the file. If the contents of the file change,
		the check sum changes also.
		• Modification date and time – Date and time that the startup
		configuration was last saved.
Boot Flash		The model number and size of the management module’s boot flash.

Brocade BigIron RX Series Hardware Installation Guide	127
53-1002483-03