Cisco Systems OL-7426-03 quick start Configuring System Parameters, Time and Date

-Distribution System physical port (1000BASE-T, 1000BASE-SX, or 10/100BASE-T).

Note that 1000BASE-SX SFP modules provide a 1000 Mbps wired connection to a network through an 850nM (SX) fiber-optic link using an LC physical connector. 1000BASE-LX SFP modules provide a 1000 Mbps wired connection to a network through a 1300nM (LX/LH) fiber-optic link using an LC physical connector. 1000BASE-T SFP modules provide a 1000 Mbps wired connection to a network through a copper link using an RJ-45 physical connector.

-Distribution System port VLAN assignment (optional).

-Distribution System port Web and Secure Web mode settings, enabled or disabled.

-Distribution System port Spanning Tree Protocol: enabled/disabled, 802.1D/fast/off mode per port, path cost per port, priority per port, bridge priority, forward delay, hello time, maximum age.

WLAN Parameters

-WLAN Configuration: VLAN assignments, Layer 2 Security settings, Layer 3 Security settings, QoS assignments.

Mobility Parameters

-Mobility Settings: Mobility Group Name (optional).

RADIUS Parameters

-RADIUS Settings.

SNMP Parameters

-SNMP Settings.

Other Parameters

-Other Port and Parameter Settings: Service port, Radio Resource Management (RRM), Serial/CLI console port, 802.3x Flow Control, and System Logging.

Other Actions

-Assemble all files that may need uploading or downloading to the Cisco Wireless LAN Controller, including the latest OS code.

Continue with Configuring System Parameters.

Configuring System Parameters

The Cisco Wireless LAN Controller requires a few basic system parameters to communicate with other network devices. Perform the following to set these parameters:

Time and Date

•Use the show time command to view the Cisco Wireless LAN Controller time and date.

•If necessary, set the Cisco Wireless LAN Controller time and date by entering:

>config time MM/DD/YY HH:MM:SS

•Use the show time command to verify that the Cisco Wireless LAN Controller has stored your input. Continue with the next parameter.

5/26/05	Configuring System Parameters
OL-7426-03