Certificate installed.

Please restart the switch (reset system) to use the new certificate.

Verify that the Web Administration certificate is properly loaded:

>show certificate summary

Web

Administration

Certificate

Locally Generated

Web

Authentication

Certificate

Locally Generated

Certificate compatibility mode:

off

Enable Secure Web mode:

>config network secureweb enable

Save the SSL certificate, key and secure web password in active working memory to NVRAM (non-volatile RAM) so your changes are retained across reboots:

>save config

Are you sure you want to save? (y/n) y

Configuration Saved!

Reboot the Cisco Wireless LAN Controller:

>reset system

Are you sure you would like to reset the system? (y/n) y

System will now restart!

The Cisco Wireless LAN Controller completes the bootup process as described in the Connecting and Using the CLI Console step in the appropriate Cisco Wireless LAN Controller

Quick Start Guide.

Make sure that operators using the Web User Interface know that they may securely log into the Cisco Wireless LAN Controller using “https://<Cisco Wireless LAN Controller_IPaddress>.

Refer to the Transferring Files To and From a Cisco Wireless LAN Controller section for other file upload and download instructions.

Adding SSL to the 802.11 Interface

When you plan to use a Web Authorization (WebAuth) certificate to secure the Cisco Wireless LAN Controller when associating new clients, note that the Operating System automatically generates its own local Web Authentication SSL certificate and automatically applies them to the 802.11 Interface. Verify whether or not the locally-generated Web Authentication certificate is already loaded:

>show certificate summary

Web

Administration

Certificate

Locally Generated

Web

Authentication

Certificate

Locally Generated

Certificate compatibility mode:

off

Continue with one of the following two sections to add a Locally-Generated Certificate or an Externally-Generated Certificate.

Locally-Generated Certificate

Should you desire to have the Operating System generate another Web Authentication SSL certificate, complete the following:

In the CLI, enter:

>config certificate generate webauth

Wait a few seconds, and the Cisco Wireless LAN Controller returns:

Web Authentication certificate has been generated

5/26/05

Adding SSL to the 802.11 Interface

OL-7426-03

 

Page 158
Image 158
Cisco Systems OL-7426-03 quick start Adding SSL to the 802.11 Interface, Config certificate generate webauth