Clearing and Restoring the Cisco WLAN Solution Logo

You can delete or restore the Cisco WLAN Solution logo shown in the Default Web Auth Operation section using the config custom-web weblogo command:

>config custom-web weblogo <disable/enable>

Refer to the Sample Customized Web Auth Login Page for an example.

Changing the Web Title

You can change the Web Title shown in the Default Web Auth Operation section using the config custom-web webtitle command:

>config custom-web webtitle <string>

To change the Web Title again, enter the config custom-web webtitle command again with a new <string>. Refer to the Sample Customized Web Auth Login Page for an example.

To change the Web Title back to the Cisco WLAN Solution default “Welcome to the Cisco WLAN Solution wireless network”, use the clear webtitle command:

>clear webtitle

Changing the Web Message

You can change the Web Message shown in the Default Web Auth Operation section using the config custom-web webmessage command:

>config custom-web webmessage <string>

To change the Web Message again, enter the config custom-web webtitle command again with a new <string>. Refer to the Sample Customized Web Auth Login Page for an example.

To change the Web Message back to the Cisco WLAN Solution default “Cisco WLAN Solution is pleased to provide the Wireless LAN infrastructure for your network. Please login and put your air space to work.”, use the clear webmessage command:

>clear webmessage

Changing the Logo

You can add or change a Logo or other graphic in the right side of the Web Auth Login screen as described in the Default Web Auth Operation section using the following instructions.

Preparing the TFTP Server

Copying the Logo or Graphic to the TFTP Server

Downloading the Logo or Graphic

Preparing the TFTP Server

Make sure you have a TFTP server available for the Logo or Graphic image download.

-If you are downloading through the Service port, the TFTP server MUST be on the same subnet as the Service port, because the Service port is not routable.

-If you are downloading through the DS (Distribution System) network port, the TFTP server can be on the same or a different subnet, because the DS port is routable.

In the CLI, use the ping <IP Address> command to ensure the Cisco Wireless LAN Controller can contact the TFTP server.

Note: The TFTP server cannot run on the same computer as the Cisco Wireless Control System, because the Cisco WCS and the TFTP server use the same commu- nication port.

5/26/05

Customizing the Web Auth Login Screen

OL-7426-03

 

Page 114
Image 114
Cisco Systems OL-7426-03 Clearing and Restoring the Cisco Wlan Solution Logo, Changing the Web Title, Changing the Logo