Table - Error Messages and Descriptions (Continued)
Error Message | Description |
|
|
LRADIF_COVERAGE_PROFILE_FAILED | Possible coverage hole detected - check Cisco 1000 |
| Series lightweight access point history to see if |
| common problem - add Cisco 1000 Series light- |
| weight access points if necessary. |
|
|
LRADIF_LOAD_PROFILE_PASSED | Load is now within threshold limits. |
|
|
LRADIF_NOISE_PROFILE_PASSED | Detected noise is now less than threshold. |
|
|
LRADIF_INTERFERENCE_PROFILE_PASSED | Detected interference is now less than threshold. |
|
|
LRADIF_COVERAGE_PROFILE_PASSED | Number of clients receiving poor signal are within |
| threshold. |
|
|
LRADIF_CURRENT_TXPOWER_CHANGED | Informational message. |
|
|
LRADIF_CURRENT_CHANNEL_CHANGED | Informational message. |
|
|
LRADIF_RTS_THRESHOLD_CHANGED | Informational message. |
|
|
LRADIF_ED_THRESHOLD_CHANGED | Informational message. |
|
|
LRADIF_FRAGMENTATION_THRESHOLD_ | Informational message. |
CHANGED |
|
|
|
RRM_DOT11_A_GROUPING_DONE | Informational message. |
|
|
RRM_DOT11_B_GROUPING_DONE | Informational message. |
|
|
ROGUE_AP_DETECTED | May be a security issue, use maps and trends to |
| investigate. |
|
|
ROGUE_AP_REMOVED | Detected rogue access point has timed out - May |
| have shut down or moved out of coverage area. |
|
|
AP_MAX_ROGUE_COUNT_EXCEEDED | The current number of active rogue access points |
| has exceeded system threshold. |
|
|
LINK_UP | Positive confirmation message. |
|
|
LINK_DOWN | Port may have a problem or is administratively |
| disabled. |
|
|
LINK_FAILURE | Port may have a problem or is administratively |
| disabled. |
|
|
AUTHENTICATION_FAILURE | Attempted security breech - please investigate. |
|
|
STP_NEWROOT | Informational message. |
|
|
STP_TOPOLOGY_CHANGE | Informational message. |
|
|
IPSEC_ESP_AUTH_FAILURE | Check WLAN IPSec configuration. |
|
|
IPSEC_ESP_REPLAY_FAILURE | Check for attempt to spoof IP Address. |
|
|
5/26/05 | Troubleshooting Tips |
|
