Cisco Systems OL-7426-03 quick start Ipsecesppolicyfailure

Table - Error Messages and Descriptions	(Continued)
Error Message		Description
IPSEC_ESP_POLICY_FAILURE		Check for IPSec configuration mismatch between
		WLAN and client.
IPSEC_ESP_INVALID_SPI		Informational message.
IPSEC_OTHER_POLICY_FAILURE		Check for IPSec configuration mismatch between
		WLAN and client.
IPSEC_IKE_NEG_FAILURE		Check for IPSec IKE configuration mismatch between
		WLAN and client.
IPSEC_SUITE_NEG_FAILURE		Check for IPSec IKE configuration mismatch between
		WLAN and client.
IPSEC_INVALID_COOKIE		Informational message.
RADIOS_EXCEEDED		Maximum number of supported Cisco Radios
		exceeded - Check for Cisco Wireless LAN Controller
		failure in the same Layer 2 network or add another
		Cisco Wireless LAN Controller.
SENSED_TEMPERATURE_HIGH		Check fan, air conditioning and/or other cooling
		arrangements.
SENSED_TEMPERATURE_LOW		Check room temperature and/or other reasons for
		low temperature.
TEMPERATURE_SENSOR_FAILURE		Replace temperature sensor ASAP.
TEMPERATURE_SENSOR_CLEAR		Temperature sensor is operational.
POE_CONTROLLER_FAILURE		Check ports - possible serious failure detected.
MAX_ROGUE_COUNT_EXCEEDED		The current number of active rogue access points
		has exceeded system threshold.
SWITCH_UP		Cisco Wireless LAN Controller is responding to SNMP
		polls.
SWITCH_DOWN		Cisco Wireless LAN Controller is not responding to
		SNMP polls, check Cisco Wireless LAN Controller and
		SNMP settings.
RADIUS_SERVERS_FAILED		Check network connectivity between RADIUS and
		the Cisco Wireless LAN Controller.
CONFIG_SAVED		Running configuration has been saved to flash - will
		be active after reboot.
MULTIPLE_USERS		Another user with the same username has logged in.
FAN_FAILURE		Monitor Cisco Wireless LAN Controller temperature to
		avoid overheating.
POWER_SUPPLY_CHANGE		Check for power-supply malfunction.

5/26/05	Troubleshooting Tips
OL-7426-03