5/26/05 Monitoring Users on a Floor Map
OL-7426-03
Monitoring Users on a Floor MapMonitoring Users on a Floor Map
Use MONITOR/Maps, click an item in the Name column, single-click the floor map, from the Display
drop-down menu, select Users to access this page.
When you select this option, the number of clients being used by the Cisco Radio is displayed on the
panel next to each Cisco 1000 Series lightweight access point. This display depends upon the selection
made from the Protocol pulldown as follows:
•802.11a: The display shows the number of clients using this protocol in the form n clients,
where n is the number of clients. Click “n clients” to display a list of clients. Refer to Monitoring
Clients on a Floor Map.
•802.11b/g: The display shows the number of clients using this protocol. Click “n clients” to
display a list of clients. Refer to Monitoring Clients on a Floor Map.
•802.11a and 802.11b/g: The display shows the total number of clients using a combination of
both protocols. Click “n clients” to display a list of clients. Refer to Monitoring Clients on a Floor
Map.
Monitoring Clients on a Floor MapMonitoring Clients on a Floor Map
Use MONITOR/Maps, click an item in the Name column, double-click the floor map, from the Display
drop-down menu, select Users, click n clients to access this page.
This page displays client parameters.
Table - Clients
Parameter Description
Check Box Click to select, so that a command can be applied.
User Name Name of the user. Refer to Monitor Client <client name> in the Cisco WCS
User Interface Online Help.
IP Address IP Address of the client.
MAC Address MAC address of the client.
Access Point Access Point Name. Refer to Monitor Access Points <name> in the Cisco
WCS User Interface Online Help.
Controller IP Address of Cisco Wireless LAN Controller to which this Cisco 1000
Series lightweight access point is attached. Refer to Monitor Switches
<IPaddress> Summary in the Cisco WCS User Interface Online Help.
Port Port number of the Cisco Wireless LAN Controller to which this Cisco 1000
Series lightweight access point is attached.
Status Associated or non-associated.
SSID Service Set Identifier being broadcast by the Cisco Radio.
Auth Authentication enabled. Yes or No.
Protocol 802.11a or 802.11b/g.