HP File Archiving Software manual Error Code Error Text Description Recommended Action

Error Code	Error Text	Description	Recommended Action
0x00050203	Verify: primary	Error: The system compares	The metadata must be erased
	metadata not found	the primary and secondary	from this file. See the fmacli
		copies of the metadata as part	erase command. If the file is a
		of the activate and verify	stub file, it must be restored
		commands. The content of the	from a disaster recovery
		primary copy of the metadata	backup.
		can not be read. FMA keeps a
		secondary copy of the
		metadata in an Extended
		Attribute.
0x00050204	Verify: alternate	Error: The system compares	The metadata must be erased
	metadata not	the primary and secondary	from this file. See the fmacli
	found.	copies of the metadata as part	erase command. If the file is a
		of the activate and verify	stub file, it must be restored
		commands. The content of the	from a disaster recovery
		secondary copy of the	backup.
		metadata can not be read. FMA
		keeps a secondary copy of the
		metadata in an Extended
		Attribute.
0x00050205	Verify: Metadata	Warning: The system read	Metadata is added to the file if
	not found.	nothing from the primary and	and when it is migrated.
		secondary copies of the
		metadata as part of the activate
		and verify commands. This file
		is not managed by FMA.
0x00060001	RSA specific error.	Error: The Remote Storage	Examine the FMA logs around
		Adapter interface reported an	the time of this error. Contact
		error. This can occur during	HP Support if the issue cannot
		most operations that require	be resolved.
		reading or writing to the
		remote archive.
0x00060002	Unable to connect	Error: The system can not	Check archive settings in the
	to archive storage	connect to the selected remote	RSA configuration. Verify that
	system	archive system. This can occur	the archive hostname or IP
		during most operations that	address is correct and that the
		require reading or writing to	remote system is online and
		the remote archive.	available for browsing. Any
			change to the RSA
			configuration settings after its
			initial creation does not take
			effect until after the FMA
			services are restarted.

Error Codes and Messages 165