HP File Archiving Software manual Options, logfile -L option

Options

Option	Description
--help	Displays Online Help for the activate command.
-h
--logfile logfile	Specifies a log file.
-Llogfile	The log file must be specified with a fully qualified
	path. Log files are created with the following
	(fixed) policies:
	• Maximum size is 10MB. If the file grows
	larger then 10MB, the file is switched.
	• Old log files are named logfile.nnn, where the
	lowest number contains the youngest file:
	logfile.log
	logfile.000
	logfile.001
	...
--log-info-message	Writes informational and debug messages to the
-V	log file (and the console).
	This option must be specified in combination with
	the --logfile -L option.
	By default, only errors are written to the log.
--verbose	Display debug information on the console
-v	(std_out).
file	Specifies a file name. Wildcards like * or ? can be
	used.
--filelist filelist	Specifies an input file list (default is stdin). Files in
-ffilelist	the file list are separated by CR/LF. File names can
	be relative or fully qualified. If you plan to run
	scripts use fully qualified names only.
--recursive path	Applies this command to subfolders starting at
-rpath	path.
--oem-file-format	Indicates that the input file list is in OEM format.
--unicode-file-format	Indicates that the input file list is in unicode
	format.
--ansi-file-format	Indicates that the input file list is in ANSI format.
--utf8-file-format	Indicates that the input file list is in UTF8 format
	(default).
--minimum-file-size nbkmg	Defines a minimum file size (n) for the specified
-S nbkmg	operation.
	The value can be specified in bytes (b), kilobytes
	(k), megabytes (m), or gigabytes (g).

84 Command Line Interface Reference