HP File Archiving Software manual Error Code Error Text Description Recommended Action

Error Code	Error Text	Description	Recommended Action
0x00060003	Authentication at	Error: The system can connect	Check archive settings in the
	storage archive	to the remote archive system,	RSA configuration. Check that
	storage system	but the designated user did not	the archive user's credentials
	failed. Check	have sufficient credentials to	are set correctly locally and in
	supported	read from or write to it. This	the remote archive system. For
	credentials	can occur during most	CIFS archives, the FMA
		operations that require reading	technical user needs to have
		or writing to the remote	full control privileges in the
		archive.	remote archive system. Any
			change to the RSA
			configuration settings after its
			initial creation does not take
			effect until after the FMA
			services are restarted.
0x00060004	File cannot be	Error: The file can not be	Check archive for capacity
	stored in archive	written to the archive system	availability.
	system.	during migration because it is
		out of storage space.
0x00060005	Configuration	Warning: The RSA	None.
	dialog cancelled	configuration dialog was
		cancelled by the user.
0x00060006	Configuration	Error: An unexpected error in	Try the operation again. Try to
	dialog error	RSA configuration occurred.	restart the FMA services or
			reboot the server. Contact HP
			Support if the problem persists.
0x00060008	No message	Warning: An alternate location	This is not an error if the
	displayed	for a given archive was not	secondary path to the archive
		defined. This can occur during	is left blank on purpose. If not,
		recalls if the secondary archive	check the secondary archive
		is omitted and the primary is	configuration and if it is
		not accessible.	online.
0x00060009	The archive does	Error: There are some	If this issue is seen frequently,
	not support the	advanced functions that are not	contact HP Support.
	requested function.	supported by the remote
		archive system. These are
		typically not invoked by FMA.
		This error can occur during
		archive management.
0x00060010	No message	Error: A retry of a previous	None.
	displayed	command was requested.

166 Error Codes and Messages