HP File Archiving Software manual Error Code Error Text Description Recommended Action

Error Code	Error Text	Description	Recommended Action
0x00090008	Error accessing	Error: The FMA filter driver	Restart the system or try to
	registry	components can not access the	remove and add the volume to
		system registry when a volume	FMA management again. If the
		was added or removed from	problem persists, contact HP
		FMA management.	Support.
0x00090009	Error accessing	Error: A file system filter	Normally, the file is set to the
	attributes.	component can not access a	state it was in prior to the
		file's attributes because the	operationally a file's offline
		file's offline attribute was	attribute ends up in the wrong
		changed when the file was	state, the “fmacli verify --
		released or recalled.	repair” command can fix it. If
			this occurs frequently, contact
			HP Support.
0x0009000A	Error accessing	Error: A reparse point is a tag	Retry the operation. If the
	Reparse Point.	that notifies the file system that	problem persists, contact HP
		the file contents cannot be	Support.
		accessed until another process
		is called first. This error
		indicates that the reparse point
		can not be read because a file's
		offline attribute is managed or
		other file information was
		queried.
0x0009000B	Error setting sparse	Error: When FMA creates a	Normally, the file is set to the
	file.	stub file, its contents are	state it was in prior to the
		converted to a zero filled	operation. Retry the operation.
		sparse file. This error indicates	If the problem persists, contact
		that this process has failed	HP Support.
		while setting the file offline
		after a release.
0x0009000C	Error writing zeros	Error: When FMA creates a	Normally, the file is set to the
		stub file, its contents are	state it was in prior to the
		converted to a zero filled	operation. Retry the operation.
		sparse file. This error indicates	If the problem persists, contact
		that part of this process has	HP Support.
		failed while setting the file
		offline after a release.
0x0009000D	No connection	Error: The connection to the	Restart the system or try to
	with filter	file system filter driver was	remove and add the volume to
		lost during an FMA file	FMA management again. If the
		management operation.	problem persists, contact HP
			Support.

172 Error Codes and Messages