Installing and Using HP LocalDirector Controller
Configuring HP LocalDirector Controller
•If they do not match, HP LDC might have trouble in getting the initial weight. Check the error entries in ldc.log again and refer to “Troubleshooting the HP LD Controller” on page 149.
4.If everything looks normal, you are ready to run the snmp_test tool. The snmp_test program tests the SNMP connectivity between the HP LocalDirector Controller and Cisco’s LocalDirector. It checks if both SNMP_get and SNMP_set are working. Before running the program, read the README.snmp_test.
If the snmp_test runs successfully without any errors, the SNMP connectivity between HP LocalDirector Controller and Cisco’s LocalDirector is working. The problem may be on the Cisco side. Refer to Cisco LocalDirector’s manuals for troubleshooting information.
If snmp_test finds errors, record the errors and look up these errors in “Troubleshooting the HP LD Controller” on page 149.
Chapter 6 | 153 |
