HP WebQoS Software manual Adding a System, Add System Configuration Description Dialog Box

Configuring HP WebQoS

Configuring WebQoS from the Management User Interface

Adding a System

To configure WebQoS for your environment you must first inform the WebQoS management system on which servers WebQoS is installed. To do this, add a system entry for each server that will run WebQoS.

To add a system, follow these steps:

1.From the management user interface, choose Actions: Add -> System. The Add System Configuration dialog box appears.

Figure 3-4 Add System Configuration Description Dialog Box

2.In the Add System Configuration Description dialog box, enter the system name in the System Name input box. The name does not need to be fully qualified. You may enter an alias. The system name must be recognized by Domain Name Service (DNS).

44 Chapter 3