HP WebQoS Software manual URL Encoding Parameters

Configuring HP WebQoS

Modifying Configuration Files Before Start-Up

URL Encoding Parameters

The following parameters allow you to support users who have disabled cookies on their browser. These parameters are useful only if you are

using the BroadVision One-To-One Server1.

•BV_SYSTEM_NAME - No default

This is the name of the BroadVision One-To-One root server. Set this parameter only if you are using the BroadVision server. You can enter up to two server names. The names must be separated by a space.

This parameter must be defined on the WebQoS management server system if you are using the BroadVision server.

•BV_USER_NAME - No default

This is the user name configured on the BroadVision One-To-One server. The user cannot be root.

This parameter must be defined on the WebQoS services system and the WebQoS management server system if you are using the BroadVision server.

•ENABLE_URL_ENCODING_BV - Default: 0 (disabled)

If you are running the BroadVision One-To-One Server, you can use BroadVision’s session count to keep track of the aggregate session count for the service. This allows you to support users who have disabled cookies on their browser. To enable this feature, set this parameter to 1.

This parameter must be defined on the WebQoS services system and the WebQoS management server system if you are using the BroadVision server.

If the BroadVision One-To-One Server is not installed but you enable this parameter, WebQoS uses URLs to maintain state information. In this case, the aggregate session count SLO is not useful.

1.The BroadVision One-To-One Server is a product of BroadVision, Inc.

Chapter 3 33