HP WebQoS Software manual Site Corrective Action Configuration Redirect Dialog Box

Configuring HP WebQoS

Configuring WebQoS from the Management User Interface

2.Choose the Redirect tab from the Site Corrective Action Configuration dialog.

Figure 3-29 Site Corrective Action Configuration Redirect Dialog Box

3.You can choose to enable or disable site-wide redirection corrective actions in the Site Corrective Action Configuration Redirect dialog box (Figure 3-29, "Site Corrective Action Configuration Redirect Dialog Box"). The default is disable. This redirection configuration applies to all redirection corrective actions for the site. If the redirection is disabled, the redirection corrective actions are ignored. This is only applicable if you choose the Redirect sessions up to NUMBER times for CLASS priority request corrective action, otherwise it is ignored. The redirection information is stored so that you can enable the redirection any time.

To enable site-wide redirection corrective actions, choose the Enable Redirection toggle in the Site Corrective Action Configuration Redirect dialog box (Figure 3-29, "Site

80 Chapter 3