HP WebQoS Software manual Add Thresholds Dialog Box

Configuring HP WebQoS

Configuring WebQoS from the Management User Interface

Figure 3-22 Add Thresholds Dialog Box

a.In the Add Thresholds dialog box (Figure 3-22, "Add Thresholds Dialog Box"), select the Threshold type from the pull down menu. For specific information on the threshold policies supported by WebQoS, see “Threshold Policies” on page 159.

b.Enter an appropriate percent in the Percent input box.

c.Select the Class from the pull down menu, if applicable.

d.Enter the appropriate Threshold Priority. The threshold priority defines the order in which the thresholds are checked. The order is compared to both threshold policies and SLO priorities. The thresholds are prioritized in ascending order (from lowest to highest) meaning a priority 1 threshold or SLO is higher in priority than a priority 2 threshold or SLO.

When multiple thresholds and SLOs are violated, the corrective action with the highest priority is taken. The highest priority starts at one.

Chapter 3 71