
PRV-9000 Operating Instructions
11ADDITIONAL INFORMATION
This section provides the following general information.
•Installation and moving hints
•
•Language Code list
•Disc handling guidelines
•Disc formats
•Screen sizes
•General Maintenance Issues
•General specifications
•Brief glossary
11.1Installation & Moving Hints
Please use the following guidelines when installing the
Use in a
Place on a solid, flat level surface
Avoid exposing to high temperatures, humidity, or direct sunlight
Install in a relatively
Locate away from the top of other equipment such as amplifiers or other components that become hot
Move away from televisions or monitors if experiencing signal interference Avoid covering with a cloth or other material that may prevent proper cooling Verify that all four supports under the unit are touching the mounting surface
To move the recorder, follow the directions below:
1.Remove the disc from the recorder if present.
2.Close the disc tray.
3.Press STANDBY/ON to switch power to Standby.
4.Wait until the message in the display window changes from Power OFF to the date and time (if this information is programmed in to the unit).
5.Disconnect the power cord.
124