PRV-9000 Operating Instructions

2.1.2Connect to a TV for Disc Playback

Connect the PRV-9000 to your TV or monitor to watch DVD discs. Using the following setup allows sound to play through the television speakers.

1.Connect Video Output 1 to the TV’s Video In jack using the provided video cable.

2.Connect Audio Output 1 Left/Right to the TV’s Stereo Audio Inputs using the provided stereo audio cable.

2.2Alternative Connections (Rear Panel)

Alternative connections encompass video and audio sources. The following diagrams are only setup suggestions for common types of products. Your equipment and setup may differ.

Note: For high-quality playback, consider sending audio and video signals through an AV receiver/amplifier.

Video – The PRV-9000 has standard (composite) S-Video and component video outputs. The type of video effects the picture quality. S-Video delivers a better picture then Composite Video while Component Video provides the best picture. The variety of outputs provides flexibility for connecting a wide range of products.

A/V Amplifier – To enjoy multi-channel surround sound, connect an AV amplifier/ receiver using either digital optical output or coaxial output. Connect through one of outputs, it is unnecessary to use both outputs simultaneously to achieve surround sound. Pioneer recommends using stereo analog as well as one of the digital connections through an AV receiver for best disc playback compatibility.

Other AV Sources – The PRV-9000 has three audio/video input ports, two sets on the rear panel and one set under a panel on the front of the unit. These connection points currently support VCRs, satellite tuners and camcorders.

12

Page 20
Image 20
Pioneer PRV-9000 operating instructions Alternative Connections Rear Panel, Connect to a TV for Disc Playback