Pioneer PRV-9000 operating instructions CD Program List

PRV-9000 Operating Instructions

To view the Program List, press SHIFT then PROGRAM on the remote control.

To add a pause between List entries, press the PAUSE button instead of a number button then press ENTER to add the pause. If there is already a number in that space, all entries after that point are forced down one step in the List. Add pauses anywhere except as the first step or the last step in a Program List. After a pause, press PLAY to resume/continue playback.

To delete an entry from the Program List, position the cursor over the entry then press CLEAR. All following entries move up by one entry line. To delete a Program List, stop the disc playback then press CLEAR. Unless the Program List is stored in the recorder’s memory, the List is also erased when the disc is removed or the recorder’s power is turned OFF (standby mode).

To insert a line within a Program List, position the cursor over the desired slot and enter the title/chapter/track. Press ENTER to store the entry and to force all following entries to drop down by one step.

To cancel a playing Program List without stopping the disc playback, press CLEAR. The disc continues playing from the current sequence but the List entries are ignored.

Occasionally during List playback, the start of a non-programmed chapter briefly appears on screen. This is not a malfunction but a part of the process to change from the end of one chapter to the next programmed chapter.

To add a currently playing title/chapter/track to the Program List, press SHIFT then hold down the PROGRAM button for at least two seconds. If the Program List is not already present, the recorder creates a new List with the current sequence as the first entry. For DVDs, if the recorder last created a Program List by title then the new List is also by title. If the disc has never had a Program List then the recorder creates a Chapter Program List.

Note: All chapters in a Program List must be within the same title.

To delete a stored Program List for a DVD, access the program menu (press SHIFT then PROGRAM) and change the Program Memory option to OFF.

A Program List may have up to 24 entries. The PRV-9000 stores up to 24 Program Lists in the recorder’s memory.

5.5.2CD Program List

The Program Memory retains Program Lists for a maximum of 24 discs with each List containing up to 24 entries. The directions below provide step-by- step instructions to create a Program List for a CD or Video-CD disc.

67