PRV-9000 Operating Instructions
12TROUBLESHOOTING
The following sections deal with common errors and specific problems when working with advanced recording devices such as the
12.1General Issues
If you are unable to see a picture or hear the audio through the DV In/Out jack, check the following points:
Check the cable between the camcorder or other DV device and the PRV- 9000.
Toggle the power (turn power Off then On again) to the DV device.
Switch the audio input.
Verify that the Linear PCM audio is set to a value other than 96 kHz.
12.2Timer Recording Issues
Although the timer is set, the recorder fails to record under the following conditions:
No discs is loaded
Loaded disc is protected (see section, Protect/Unprotect an Original Title) Loaded disc already contains the maximum number of titles (99 titles)
Entering a timer program is unavailable during the following situations:
Recording is already taking place
Clock is not set
Selected recording time has already passed
Eight timer programs already exist
If two or more programs overlap, the following actions occur:
Earlier program takes priority
As the earlier program finishes, the later timer program begins recording
133
