PRV-9000 Operating Instructions
3. Why does the disc automatically eject after closing the disc tray?
Confirm that the disc is aligned in the tray properly with the label facing up.
Remove the disc and clean the recording/recorded surface.
Verify that the region code is compatible with the
4. Why won’t my disc play?
The media surface may contain dust or smudges. Clean the disc and retry.
Verify that a region code on the disc matches the region code on the recorder.
Check that the disc is aligned properly on the tray and that the label facing up.
Condensation may have formed within the recorder. Allow the unit to stabilize at the current room temperature for one to two hours before attempting to play the disc.
5. Where did my settings go?
If the unit is unplugged or there is a power failure while the recorder is ON, all settings return to the original default values. Returning the recorder to Standby mode before unplugging the unit saves your settings.
6.Why did my screen go blank at the same time that all the buttons stopped working?
The recorder has a command conflict. Press the STOP button on the front panel of the unit and restart playback.
7. What does this symbol, 
, mean?
The symbol means that the operation you want to perform is unavailable on that disc. The recorder is functioning properly.
8. What does this symbol, 
, mean?
The symbol means that the recorder prohibits the operation you want to perform. The recorder is functioning properly.
9.Why did the remote control stop working? Change the angle to test the operating range.
When this recorder is connected to other Pioneer devices through the CONTROL IN/OUT ports, point the remote control at the other device(s).
The remote control’s ID number must match the recorder’s ID number.
136
