PRV-9000 Operating Instructions
The directions below provide
1.Load a disc in to the recorder.
The disc may be playing, paused or stopped. If the disc is playing, the picture appears in the lower right corner of the screen.
2.Press the SHIFT button on the remote control.
3.Press PROGRAM (7 on the number pad) to access Program Play List.
4.Use the joystick to highlight Title or Chapter.
If selecting Chapter, use the joystick to move up to enter the title number in the appropriate box. press Enter to select that title. All chapters for the Program List entry must come from this title.
5.Use the joystick to move to the first Program List number field if the cursor is not in the proper location.
6.Enter a title/chapter number for this program list.
title/chapter 8: press 8 on the number pad then press ENTER
title/chapter 16: press 1 and 6 then press ENTER
Note: To add a pause instead of a title or chapter, press the PAUSE button for a Program List entry instead of entering a title/chapter number on that line.
7. Press ENTER after each number entered on a Program List entry field.
8.Continue adding numbers to complete the Program List.
9.Use the joystick to move the cursor down to Program Memory.
10.Select ON to activate the Program Memory and save the program list. Each time this disc is loaded, the recorder automatically recalls the Program List.
11.Press PLAY to begin Program List playback.
To play the List at a later time, press SHIFT, then PROGRAM.
66
