
The following messages may appear
DV camcorder not connected
Check the cable connection from the camcorder to the jack. Reseat the cable if necessary. Also verify that the camcorder is powered ON.
The power is switched off
Check the power on the camcorder and turn on if necessary.
Too many camcorders connected
The DV jack supports a single DV device at one time.
No cassette
Load a cassette in to the connected equipment.
Put into play or stop mode
The camcorder is either in camera/record mode or
Playback stopped
Verify that the tape is running and that the camcorder is sending a signal.
The DV camcorder does not operate
Check the camcorder for operation or power problems. Try switching off the DVC link (detailed explanation in a later chapter).
If problems with audio or video occur, read through Chapter 10: TROUBLESHOOTING for assistance.
Note: Some camcorders are incompatible with the remote control for the
This recorder is equipped with
19