18.Press STANDBY/ON to change the recorder to the standby mode.
19.Press STANDBY/ON again to power the recorder ON.
4.1.4Auto-Tune the Channels
The
ENTER / Joystick
1.Press SETUP to access the menu.
2.Highlight Initial Setup from the main menu. Use the joystick to highlight the option.
3.Press ENTER to confirm your selection.
SETUP
CHANNEL +/-
4.Highlight Tuner from the Initial Setup menu by using the joystick.
5.Select Auto Channel Setting from the Tuner submenu.
6.Select Antenna or Cable to automatically begin scanning for stations. To cancel the Channel Search at any time, press ENTER.
29