Pioneer PRV-9000 operating instructions Record From an External Component

PRV-9000 Operating Instructions

The recorder allows one camcorder interaction at a time.

Controlling the recorder with equipment connected through the DV IN/OUT port is unavailable. Controlling a second PRV-9000 connected to this port is also not an option.

A few camcorders fail to accept commands sent through the DV IN/OUT port. Some camcorders may ignore particular commands sent through this port. Check with the camcorder’s manufacturer for support information.

The recorder outputs DVD video from the DV IN/OUT port; passing through signals from the built-in TV tuner, CD, Video CD and other equipment is unavailable.

Copy-protected or copy-once DVD signals are blocked from passing out through the DV IN/OUT port.

Although digital camcorders may record as stereo 16-bit/48kHz or twin-stereo tracks of 12-bit/32kHz, the recorder only records a single stereo track. Set DV Input to Stereo1 or Stereo2.

Audio output from the DV IN/OUT port is limited to 16-bit.

Audio input through the DV IN/OUT port must be 32kHz or 48kHz rather than 44.1kHz.

6.3.1Record From an External Component

Follow the directions below to record from an external component such as a standard camcorder or a VCR. Skip to the next section to record from digital camcorders.

1.Connect the external component to the recorder.

Refer to the chapter on Connections for port information.

2.Power up both devices.

3.Press INPUT SELECT repeatedly to scroll through input ports.

Input Port	On-Screen Display
Built-in Tuner	(Channel number)
INPUT 1	L1 (S-Video)
INPUT 2/AUTO REC	L2 (BNC)
INPUT 3 (front panel)	L3
DV IN/OUT	DV

4.Leave the selection highlighted.

83