Mitsubishi Electronics MR-J2S- A 21 *OP3 22 *OP4 Expansion parameters, Function selection 0000

5. PARAMETERS

Class No. Symbol

21 *OP3

22 *OP4

Expansion parameters 1

			Name and function		Initial	Unit	Setting	Control
					value		range	mode
Function selection 3 (Command pulse selection)					0000		0000h	P
Used to select the input form of the pulse train input signal.							to
(Refer to Section 3.4.1.)							0012h
0
	0
				Command pulse train input form
				0: Forward/reverse rotation pulse train
				1: Signed pulse train
				2: A/B phase pulse train
		Pulse train logic selection
		0: Positive logic
		1: Negative logic
Function selection 4					0000		0000h
Used to select stop processing at LSP/LSN signal off and choose							to
VC/VLA voltage averaging.							0401h

0	0
		How to make a stop when LSP/LSN	P S
		signal is valid. (Refer to Section 5.2.3.)

0:Sudden stop

1:Slow stop

VC/VLA voltage averaging		P S T
Used to set the filtering time when the
analog speed command (VC) voltage
or analog speed limit (VLA) is imported.
Set 0 to vary the speed to voltage fluctua-
tion in real time. Increase the set value
to vary the speed slower to voltage flu-
ctuation.
Set value	Filtering time [ms]

00

10.444

20.888

31.777

43.555

5 - 13